Product Data :
| Type of Material: Aliphatic Polyaspartic | VOC Content : 0 g/l |
| Mixing Ratio : 1.0 part A : 1.0 part B | Tensile Strength : 4000- 5000 psi |
| Re-Coat at least : 2 hours | Recommended Re-Coat : <24 hours |
| Compressive Strength : 50-55 N/mm² | Pot Life : ~30 minutes |
| Shelf Life : 6 months in original sealed container. Storage temperature: 0 ℃ to 30 ℃ | |
HTC 805 Pollyaspartic Coatings
Two Component, 100% Solid , Solvent Free , Semi-Elastic ,Self-leveling Aliphatic Polyaspartic based Floor Coatings designed to provide UV stable, rapid return to service and it can be applied for exterior applications.
System Advantages :
| – UV Stable & Resistant | – Single day installation, Rapid return to service |
| – Excellent Gloss Retention | – Crack bridging properties (Extremely durable) |
| – Non Slip Top Coat | – Anti-microbial Top Coat |
| – 10-15 years Life Expectancy | – Glossy finish Top Coat |
| – Hot tire resistance | – Outstanding abrasion resistance, chemical & stain resistance |
| – No odor, No VOCs system | – Stain resistance |
| – Excellent mechanical bonding | – Suitable for Interior & Exterior applications |
| – Very low viscosity & easy to apply |
Typical Applications :
- Garage floors
- Heavy Traffic Areas
- Manufacturing areas
- Roof Top
- Driveways
- Warehousing setting
- Chemical & Pharmaceutical industries
- Other various applications
1. Provide Cost Save
Hi-Tech Coatings are impermeable and Anti-microbial surface makes Floors. Easier to maintain, lowering application costs with faster cure formulations
2. Enhance Your Image
UV stable, Glossy clear topcoat and pigmented coatings provided for a rich long lasting finish that will not fade,yellowing & peeling off.
3. Get The Right Solution
The High-Quality Hi-Tech Polyaspartic coating systems
Present excellent performance result
| Hi-Tech Fast cured floor coatings Solid Color System |
Hi-Tech Fast cured floor coatings Chip / Quartz System |
|---|---|
 |
 |
| High gloss topcoats | Fast one-day application with nextday return to service |
| Fast one -day application with next-day return to service | Varieties of quartz and paint chip Media blends |
| Clear top coat can be used alone for sealer application | suitable for areas requiring increased coefficient of friction |
| Excellent Elongation property | |
| Recommendation : Industrial and Commercial areas, Flat Roofs etc. | Recommendation : Garage floor , Show room, Commercial Kitchens etc. |
Adhesion is Paramount to our Performance !
In order to bond both chemically and mechanically ,Hi-Tech Coat was designed a very low viscosity and self leveling properties, so the coatings are absorbed into various substrates more easily.
A fundamental component differentiating Hi-Tech from other products, our technology is maximizing bonding properties to many substrates and is the cornerstone of our superior performance .
Important Precautions :
■ Substrate must be free of dirt, oil, grease, wax and other contaminations
■ Do not apply over damp or wet substrates
■ Avoid any applications on surfaces with a high levels of moisture vapor transmission
■ Pay attention to the working time
Application :
Surface Preparation is one of the most important criteria of any successful application of the resinous flooring system. All substrates must be properly prepared as outlined
Any Works must be performed by trained or experienced contractors or maintenance personnel. Our Hi-Tech technical consultant is very pleased to answer any technical queries and solve the problem properly.
Moisture Tolerance
This system requires a dry substrate. Any moisture vapor transmission test revealing over 3.5 pounds per 1000 feet/24 hours requires a moisture barrier system installed prior to application.
Surface Preparation
Due to the extremely low viscosity of HTC 805, self priming is very suitable. Ensure the substrate is free of contaminants, and the pores are open to allow HTC 805 to penetrate the surface.
Installation :
(Kindly Contact Hi-Tech Technical Representatives Prior to Installation for further guidance).
HTC 805 is a two component material (1 parts B to 1 part A by volume). Mix Part A & Part B while stirring , using a slow speed mechanical mixer(300 rpm). Mix until homogenous liquid is obtained (approximately 2-3 minutes ). Do not whip too much air into the product, which may entrap the air bubbles into the coating film. Pour the components slowly to avoid introducing air bubbles.
It is recommended to be applied by rolling or brushing. Easy application is accomplished by pouring the freshly mixed material on the floor, spreading to the desired thickness with a rubber squeegee, and finish rolling immediately. It should be roller or squeegee applied 4-6 mils thickness per coat, depending on system requirements. Total application time should take no longer than 15 minutes.
HTC 805 will be tack-free within 1 hour at 25℃ and 75% relative humidity. Re-coat time is over 2-3 hours in general. Light pedestrian traffic is possible after 8 hours ,24-48 hours before heavy pedestrian or automotive traffic. It is highly stain resistance and hot tire resistance after 72 hours.
Installation Instruction :
| Product Data | |||
|---|---|---|---|
| Appearance | Packing | Density | |
| Part A “Resin” | Clear or Pigmented Liquid (Spectra) |
5 kgs or 10 kgs | 1.06 kg/l |
| Part B “Hardener” | Very clear, colorless Liquid |
5 kgs or 10 kgs | 1.13 kg/l |
| Part A + Part B | Clear coat | 5 kgs or 10 kgs 5 kgs or 10 kgs |
Mix Ratio 1 to 1 by Weight |
| Solids Content : | 100 %, Zero VOC | |||||||||||||||||||||
| Viscosity : | <500 mPa.s @ 25 ºC | |||||||||||||||||||||
| Finsh : | Clear and Glossy only | |||||||||||||||||||||
| Mixing Method : | Low Speed, Jiffy mixer or stir with a glass rod gently | |||||||||||||||||||||
| Thinning : | Not recommended for TopCoats, if needed use Butyl Acetate | |||||||||||||||||||||
| Mixing Ratio : | 1 to 1 by Weight | |||||||||||||||||||||
| Coverage : | ||||||||||||||||||||||
| Prime Coat / | 107 ft² per L @ 4 mils | |||||||||||||||||||||
| Basecoa Top Coat | 43 ft² per L @ 6 mils | |||||||||||||||||||||
| Working Time @20 ºC : | 20-25 minutes | |||||||||||||||||||||
| Drying Time : | Surface Dry : 1 hours Hard Dry 4-5 hours |
|||||||||||||||||||||
| Recoat Window : | Recoat time after＞2 hours before 24 hours | |||||||||||||||||||||
| Light Traffic : | 8 hours | |||||||||||||||||||||
| Full Cure : | 7 Days | |||||||||||||||||||||
| Storage Conditions / Shelf Life : | 6 months from date of production, if stored properly in original unopened, undamaged & sealed packaging in dry conditions at temperatures between 5ºC and 30 ºC |
|||||||||||||||||||||
| Standard Colors : |
|
|||||||||||||||||||||
| Technical Data | ||||||||||||||||||||||
|
||||||||||||||||||||||
Limitations
1. Avoid applying HTC polyaspartic coatings in direct sunlight during times of extreme heat. This can cause air bubbles being caught under the surface of the coating, wrinkling, blistering and pinholes. Schedule the
application for early morning or late afternoon when ambient and substrate temperatures are low.
2. For a suitable cure schedule, do not apply this coating at film thicknesses greater than 12 mils. At this film thickness, the surface will appear dry according to the dry to touch time established here but remain soft under
the surface, which can potentially cause defects if not enough time is allowed for a full through cure.
3. HTC polyaspartic is not intended for, immersion or application where moisture can reach the underside of the coating.
4. Protect both components A and B from freezing, heat, moisture and foreign materials.
5. In general, there is no temperature limitation when applying HTC polyaspartic coatings.
Warning: It is very important to apply HTC 805 Polyaspartic coatings over a completely dry substrate. Failing to do so, will result in water reacting with Polyaspartic part B ; leading to foaming and whitening, which will diminish the appearance.
Maintenance :
After completing the application of HTC 805 , the installer should provide the owner with maintenance instructions .
Storage Conditions :
– Storage in original sealed HTC container.
– Exposure to sunshine should be avoided.
– Recommended storage temperature: 0-30 °C
– Protect from moisture, heat and foreign material.
Warranty Disclaimer :
We guarantee our products to conform to the specifications of Favourways International Limited. Favourways International Limited makes no warranty or guarantee, express of implied, including warranties of fitness for a particular purpose or mechanic property, respecting its Products. Liability, if any, is limited to refund of purchase price or replacement of the Product. All consequential damages, labor and cost of labor are hereby excluded.