DESCRIPTION
Modified polyisocyanate prepolymer based on diphenylmethane diisocyanate. As a injection resin for sealing
water-conveying cracks in structures above and below ground
TYPICAL DATA
| NCO : | 15.7 ± 0.5% | M105-ISO 11909 |
| Viscosity at 25℃: | 1,100 ± 400 mPa | M014-ISO 3219/A.3 |
| Flash point : | > 200℃ | DIN EN ISO 2719 |
| Density 20 °C : | approx. 1.12 | DIN EN ISO 2811-3 |
*These values provide general information and are not part of the product specification.
KEY BENEFITS
- Potable water certified
- High tensile adhesion
- Solvent free, environmentally safe
- Excellent adhesion to most surfaces including concrete, brick and mortar
- Resistant to most organic solvents, mild acids and alkalis
- Rapidly forms a highly resilient flexible seal that allows movement to the crack, fracture or joint
- Reacts even with seawater or mineral water
PROPERTIES / APPLICATIONS
- Sealing against water ingress
- Sealing against leaking cracks and joints
- Sealing against water in masonry and brickwork
- Void filling
- Back grouting
STORAGE CONDITIONS
- Storage in original sealed HTC containers.
- Exposure to sunshine should be avoided.
- Recommended storage temperature: 10 – 30 °C
- Protect from moisture, heat and foreign material.
Warranty Disclaimer
We guarantee our products to conform to the specifications of Favourways International Limited. Favourways
International Limited makes no warranty or guarantee, express of implied, including warranties of fitness for a
particular purpose or merchantability, respecting its Products. Liability, if any, is limited to refund of purchase
price or replacement of the Product. All consequential damages, labor and cost of labor are hereby excluded.